Maintenance Memberships

Why Are Maintenance Memberships Important?

Did you know that your air conditioning unit runs about 1,600 hours per year, and your heating system runs about 1,400 hours per year?

You rely on your heating and cooling system every day. Similar to a car, your heating and cooling system requires routine maintenance to operate efficiently, safely and reliably for the expected life of the unit.

Maintenance on your heating and cooling system is something that we don’t often think about, yet it has one of the most dramatic effects on our utility bills. Manufacturers of heating and cooling equipment recognize that bi-annual maintenance of your HVAC system is necessary for continued efficiency, safety and to extend the life of your equipment.

Keep your HVAC system tuned up bi-annually to extend the life of your unit. We offer a bi-annual Maintenance Membership to keep your Oklahoma or Arkansas heating and cooling system in peak condition all year long.

Maintenance Memberships

Residential HVAC
Commercial HVAC
Heating
Generator
Residential HVAC Commercial HVAC Heating Generator
  1. Air Conditioner 26 Point Check-Up
    1. Check refrigerant pressures in the covered system.
    2. Calculate sub-cooling in the system.
    3. Calculate superheat in the system.
    4. If the system is undercharged complete visual inspection for a refrigerant leak, identifying oil markings.
    5. Lubricate bearings on blower shafts.
    6. Check motor and blower pulleys for wear.
    7. If the motor has grease cert, add grease to bearings.
    8. If the motor has an oil port, oil motor bearings.
    9. Ensure bearings have no side to side play and smooth rotation.
    10. Check belts for wear, cracks or fraying. Align belts and pulleys as needed along with tension belts.
    11. Measure motor amperages on compressor, condenser fan motor and blower motor.
    12. Verify proper CFM settings on variable speed blower motors and condenser fan motors.
    13. Check compressor terminals and electrical connections and tighten connections if needed.
    14. Check contractor contacts for pitting or signs of overheating.
    15. Inspect disconnect box for damage or signs of overheating.
    16. Check expansion valves and bulbs.
    17. Measure evaporator temperature drop: make adjustments for optimal cooling performance.
    18. Clear condensate drains secure drain lines and verify proper termination point.
    19. Identify safety concerns and safety shut off options for condensate drains.
    20. Check and verify operation of safety circuits for condensate and compressor.
    21. Measure capacitance and voltage of capacitors.
    22. Washing condensing coil.
    23. Check air filters. Wash permanent filters.
    24. Check thermostat settings, temperature display and programming.
    25. Cycle equipment at the thermostat.
    26. Check overall operation and make adjustments necessary for the maximum efficiency of air conditioning equipment.

     

    *May not be combined with other offers.

    Want to save money? Ask about our Planned Maintenance Memberships!

     

Maintenance Membership Benefits

  • Automated scheduling.
  • Priority response.
  • 24 Hour Emergency Availability.
  • Professionally Trained Service Technicians.
  • Power wash rig using hot water to clean condenser coils, not harsh chemicals that hurt the environment.
  • Reduces unnecessary breakdowns.
  • System downtime reduced.
  • System performance improved.
  • Operating costs lowered.
  • Life of equipment extended.
  • 5% Discount for equipment replacements.
  • Discount on labor costs.
  • 10% Discounts on repair parts.
  • Same discounts received for our plumbing services.
  • Same discounts received for our electrical services.
  • Non-Commissioned employees.
  • Planned Replacement Program.

Furnace 26 Point Check List

  1. Clean the burners.
  2. Clean the flame sensor.
  3. Clean the heat exchanger.
  4. Check the vest panel for cracks.
  5. Check the draft motor for noises.
  6. Check the cracks on the draft housing.
  7. Check the flue pipe for proper installation.
  8. Check the flue piping size.
  9. Check PVC flue pipe for proper fall to the furnace
  10. Check the safeties for proper operation.
  11. Check the burners for proper operation.
  12. Clean the flame sensor and ignitor if applicable.
  13. Check the flame sensor current.
  14. Check the incoming gas pressure.
  15. Check the burner pressure and adjust if necessary.
  16. Check the blower control for proper operation.
  17. Check the control board for proper operation, adjust time and blower speed if necessary.
  18. Check the blower motor
  19. Check the blower wheel.
  20. Check temp rise on the heat exchanger.
  21. Wash or replace filters.
  22. Check the thermostat, adjust or program if necessary.
  23. Check UV lights.
  24. Check the humidifier and clean it if necessary.
  25. Check the CO and signs of leakage.
  26. Oil the motor if necessary.

ADDITIONAL CHECKS FOR HEAT PUMPS:

  1. Check the defrost control sensors.
  2. Check the defrost operation.
  3. Check the sensor probes location.
  4. Check fan motor operation in defrost.
  5. Check Freon pressure in defrost termination.
  6. Check for proper voltage.
  7. Check for proper low voltage.

    **May not be combined with other offers.

Want to save money? Ask about our Customer Memberships!

We Currently Only Offer Generators In Oklahoma

We cannot control the weather, but we can control how it affects your home lifestyle. Airco Service offers Installation and Generator Maintenance on all standby Generators. Nothing is scarier than the thought of your Generator not coming on when you need it most. Let Airco reassure you that yours will start up with no problem.  Doing routine maintenance will give you peace of mind knowing during the next storm or power failure, you won’t be in the dark.

Generator Checklist:

  • Proper Gas/Propane Pressures.
  • Evaluate spark plugs.
  • Good oil levels.
  • Air filters clean of debris.
  • Check that Voltage/ Amperage / Hertz coming out of unit going into the home.
  • Weekly exercise is cycling correctly.
  • Check the transfer switch is engaging correctly.

Residential Customers have maintenance done once a year, depending on your set up.

Call us for a Free Generator Maintenance Quote or Details on Replacement! 

Call Now Schedule Online

Planned Maintenance

maintenance plans
Call Now Schedule Online

We Offer Premium Maintenance Memberships for Your Equipment

maintenance plans

Residential Membership:

  • 10% Discount off of the total repair invoice for all services during regular business hours.
  • There is no overtime charge for emergency services, including a 10% discount off on parts.
  • When replacing a complete heating and air conditioning system with Airco Service the cost of this membership (for one system) is discounted off of the replacement price.
  • Two scheduled tune-ups per year (1 cooling tuneup and one heating tuneup) during regular business hours. 1-inch filters included with each tune-up — repairs not included in these services.
  • Discounts apply to all repair services offered by Airco Service.
  • This agreement is non-transferable and non-refundable. Valid only when the contract paid in full.

Preferred Membership:

  • No diagnostic charges for HVAC services.
  • 10% Discount off of the total repair invoice for all services during regular business hours.
  • There is no overtime charge for emergency services, including a 10% discount off on parts.
  • When replacing a complete heating and air conditioning system with Airco Service the cost of the membership (for one system) is discounted off of the replacement price.
  • Two scheduled tune-ups per year (1 cooling tuneup and one heating tuneup) during regular business hours. 1-inch filters included with each tune-up — repairs not included in these services.
  • Discounts apply to all repair services offered by Airco Service.
  • This agreement is non-transferable and non-refundable. Valid only when the contract is paid off.

VIP Membership:

  • No diagnostic charges for HVAC, Plumbing, or Electrical services.
  • 10% Discount off of the total repair invoice for all services during regular business hours.
  • There is no overtime charge for emergency services, including a 10% discount off on parts.
  • When replacing a complete heating and air conditioning system with Airco Service the cost of the membership (for one system) is discounted off of the replacement price.
  • Two scheduled tune-ups per year (1 cooling tuneup and one heating tuneup) during regular business hours. 1-inch filters included with each tune-up — repairs not included in these services.
  • One scheduled water heater flush performed with the heating tune-up. Tankless water heaters will be an additional charge.
  • Discounts apply to all repair services offered by Airco Service.
  • This agreement is non-transferable and non-refundable. Valid only when the contract is paid off.
Call Now Schedule Online

Free Maintenance Membership Estimate

maintenance plans

You can request a free estimate using our online scheduler (if available in your area) or by calling us. Once your appointment is confirmed, we will dispatch an Airco Service team member to provide you with a free estimate at the time you requested.

If you are in need of EMERGENCY ASSISTANCE, please call our office for immediate help.

Call Now Schedule Online