Plumbing Leaks and How to Spot Them

Posted on: Dec 17, 2019

Plumbing leak detection is used to determine whether there is any leak in the system. Leaks lead to significant loss when not detected on time. Hydrostatic testing, laser, and infrared technology are the standard methods of plumbing leak detection. These processes required well-trained plumbers devoted to providing high standard services anytime needed. 

Below are several ways you can detect leaks to save money and avoid damage:

1. Monitor Your Bill

After paying your water bill, make sure to check the daily usage and make an estimation. If you realize that the bills hike even when you have used water sparingly, hire an expert for inspection. When a small family is using more than 12,000 gallons of water in a month, there must be a severe leakage that should be addressed.

2. Check Ceilings & Exterior Walls 

Even after pipes are correctly installed, they can wear out, thus leading to leaks. Sometimes it’s challenging to find a hidden hole. Make it a habit to check the back of cabinets and under sinks for signs of mold or an odd smell, which might be as a result of a leak. Also, consider hiring a plumber to do a thorough inspection and identify and repair any leaks as well as their cause. This can help you save a lot of money over time since your leak will be spotted and repaired quickly and professionally.

If your home or business areas are more than a decade old, your plumbing system may need repair or replacement. The plumber should check all available connections at the water heater, washing machines, pumps, and oxidation valves. After spotting even the smallest leak, don’t wait until when the leak worsens; instead, hire an expert to make repairs.

3. Use Some Food Coloring

Toilets can waste hundreds of gallons of water if not well maintained. Fortunately, toilets leaks are easy for professionals to repair. 

The easiest way to identify a leak is by adding some food coloring in your tank, then waiting for a few minutes. If you see the color in the bowl or on the floor, you have a leak. Get your plumber to repair your bathtub or toilet immediately. 

4. Underground Leak Detention

Underground water leaks create havoc and end up costing you a lot of money. It’s good to check parts of your property that are always wet. Check the driveway, street, or curb for any signs of wetness.  

Additionally, check your meter readings before shutting off your water and then check meter readings after a few hours. Any difference means water is leaking. 

5. Detecting Wastewater Leaks 

It’s easier to detect leaks from the water you use to bathe or drink since it’s delivered under pressure. However, wastewater moves by gravity, and a leak may not be apparent. The location of the wastewater leak may not be the source of the leak. It may originate from one place and end up in another. It’s always good to have a professional plumber check it out for you. 

Conclusion

A professional inspection is the best way to avoid expensive plumbing repairs. Hire a trusted plumber to check out your home, check for plumbing leak, and repair or replace the damaged part before you incur significant losses. Airco Service has been in operation for many decades. Their plumbers have extensive experience dealing with leaks and use advanced electronic equipment to pinpoint the problem and repair the leak before it costs you more money and causes more damage to your home. If you’re looking for full-time plumbing services or 24-hour emergency services, contact Airco Service today.